| 1. Pay attention to the wire tip of the wire cut first, and then thread according to the threading diagram in the instruction manual of the middle wire cutting, but it must be noted that the molybdenum wire must be wound in accordance with the instructions. At each of the guide wheels and the conductive block up to the storage tube. There is also the need to pay attention to the strength of the hand when threading, to avoid the occurrence of wire cutting molybdenum wire breakage.
2. Note that the molybdenum wire on the wire cutter of the wire cutter must be on the horizontal line with the auxiliary and tensioning guide wheel of the middle wire and the main wheel, otherwise the wire cutter is stored in the wire cutting machine. The molybdenum wire may be broken due to overlap.
3, pay attention to the wire cutting machine when the threading machine must be controlled by the left and right stroke of the wire cutting machine, so that the middle wire storage tube can be guaranteed to have three to five at both ends when reversing The margin of millimeters. |
Location：
