2. Choose a place that can withstand the weight of the machine

3. Select a place where there is no vibration and impact. Wire-cutting discharge machines are high-precision machining equipment. If there are vibrations and impacts at the places where they are placed, they will cause serious damage to the machine table, which will seriously affect its processing accuracy, shorten its service life, and even cause the machine to be scrapped.

4. Choose a site that is not dusty and avoid flowing beside the numerous passages. The inherent characteristics of the wire-cutting discharge machine, the presence of dust in the air, will cause the screw of the machine to be seriously worn, which will affect the service life. The wire-cutting discharge machine belongs to the computer control. The disk used by the computer has very strict requirements on the dust in the air. When the dust in the disk enters, the disk will be damaged and the hard disk will be damaged. The wire-cutting discharge machine itself generates a lot of heat, so the electrical cabinet needs frequent air exchange. If there is too much dust in the air, it will accumulate on the various electrical components during the air exchange process, resulting in poor heat dissipation of the electrical components, resulting in the circuit board Burned out. Therefore, the machine dust screen should be cleaned frequently.

Choose a place where the temperature changes little, and avoid sunlight passing through the window and top window glass and near the heat flow. High-precision parts processing products need to be carried out at a constant temperature, usually 20C at room temperature. Since the wire cutting discharge machine itself generates a considerable amount of heat during operation, if the temperature change is too large, the service life of the machine may be seriously affected.